Canon DR-2580C - Manual (Page 22)

18 Using the Scanner
1. Documents
This scanner can scan documents ranging in size from business cards and
checks to LTR/A4 size documents. The size of documents that can be scanned
is shown below.
(*1) For information about the output directions, see “Document Eject Tray,”
on p. 22.
(*2) If the document is longer than 11.7" (297 mm), use the bypass mode with
feed selection lever for document scanning. (See p. 28.)
(*3) When the scanner is set to Long Document mode it can scan documents
on paper that is up to 1,000 mm long. See “Long Document Mode,” on
p. 50 for details about Long Document mode.
(*4) For information about feeding a document, see “Placing Documents,” on
p. 25.
IMPORTANT
A document must meet the following criteria to be scannable:
• When scanning a multipage document, pages must be grouped together so
that they have the same size, thickness, and weight. Scanning different types
of paper at one time can cause the scanner to jam.
Eject Direction (*1) U-Turn Path Straight Path
Width 2.08" to 8.5"
(53 mm to 216 mm) 2.08" to 8.5"
(53 mm to 216 mm)
Length(*2) (*3) 2.75" to 13.9"
(70mm to 355.5 mm) 2.75" to 13.9"
(70 mm to 355.5 mm)
Weight (*4)
Feeding
documents are
separated
Feeding
documents are not
separated
14 to 32 lb bond
(52 to 128 g/m
2
)
0.0024" to 0.0059"
(0.06 mm to 0.15 mm)
11 to 40 lb bond
(42 to 157 g/m
2
)
0.0020" to 0.0079"
(0.05 mm to 0.20 mm)
11 to 40 lb bond
(42 to 157 g/m
2
)
0.0020" to 0.0079"
(0.05 mm to 0.20 mm)
11 to 40 lb bond
(42 to 157 g/m
2
)
0.0020" to 0.0079"
(0.05 mm to 0.20 mm)
Business Cards Cannot be scanned Can be scanned
(not separated)
Size: 2.12"
× 3.37"
(53.9 mm × 85.5 mm)
Thickness: 0.03" ± 0.003"
(0.76 ± 0.08 mm)
without embossing