Canon DR-2580C - Manual (Page 28)

24 Using the Scanner
Using the Straight Path
1.
Raise the eject selection lever.
Scanned documents will be ejected to the back of the scanner.
Note
When using the straight path, the ejected documents are stacked in reverse
order to how they were fed.
IMPORTANT
• Be sure there is enough space for documents that are ejected behind the
scanner when using the straight path. If there is not enough space for ejected
documents, the documents may be damaged or a paper jam may occur.
• Switch the position of the eject selection lever before you start scanning.
Changing the lever position while scanning is being performed can cause
jamming.
Eject Selection Lever