Canon DR-2580C - Manual (Page 16)

12 Before Using the Scanner
3. Names and Functions of Parts
This section describes the name and function of each part. Make sure to read
this section and familiarize yourself with the parts of the scanner before using
the scanner.
„ Front
Job Buttons
These buttons can be assigned functions using the
Job Registration Tool. (See p. 36.)
Document Eject Tray/
Upper Unit
Scanned documents are
ejected here. (See p. 22.)
Open to clear paper jams
and for cleaning.
Power Indicator
This indicator lights
when the scanner is
turned ON.
OPEN Knob
Opens the upper unit.
(See p. 20, p. 47 and
p. 71.)
Document Guides
Adjust them to align
with the width of the
document. (See p. 21
and p. 26.)
Document Feed Tray
Place the document
to be scanned here.
(See p. 20.)
Document Eject Tray Extension
Open when reading a document.
(See p. 23.)
Feed Selection Lever
Use it to change the way the documents are fed.
Move it up (
) to continuously feed documents
(Page Separation mode). (See p. 25.)
Move it down (
) to feed documents one at a time
or to feed documents that are fastened together,
such as invoices, without separating them (Bypass
mode). (See p. 28.)