After working inside your computer – Dell Inspiron 660s (Early 2012) User Manual
Page 11
Advertising
After Working Inside Your Computer
11
After Working Inside Your Computer
After you complete replacement procedures, ensure the following:
•
Replace all screws and ensure that no stray screws remain inside your
computer
•
Connect any external devices, cables, cards, and any other part you
removed before working on your computer
•
Connect your computer and all attached devices to their electrical outlets
CAUTION:
Before turning on your computer, replace all screws and ensure that
no stray screws remain in the computer. Failure to do so may damage your
computer.
•
Turn on your computer.
book.book Page 11 Thursday, April 5, 2012 5:38 PM
Advertising