Replacing the power-supply unit – Dell Inspiron 660s (Early 2012) User Manual
Page 61
Power-Supply Unit
57
Replacing the Power-Supply Unit
Procedure
1 Slide the power-supply unit toward the back of the chassis.
2 Align the screw holes on the power-supply unit with the screw holes on the
chassis.
3 Replace the screws that secure the power-supply unit to the chassis.
Postrequisites
1 Replace the system board. See "Replacing the System Board" on page 71.
2 Replace the processor. See "Replacing the Processor" on page 64.
3 Replace the processor fan and heat-sink assembly. See "Replacing the
Processor Fan and Heat-Sink Assembly" on page 61.
4 Replace any PCI-Express cards, if applicable. See "Replacing the PCI-
5 Replace the Mini-Card, if applicable. See "Replacing the Mini-Card" on
6 Replace the memory-module(s). See "Replacing Memory Module(s)" on
7 Replace the drive cage. See "Replacing the Drive Cage" on page 39.
8 Replace the fan shroud. See "Replacing the Fan Shroud" on page 20.
9 Replace the computer cover. See "Replacing the Computer Cover" on
10 Follow the instructions in "After Working Inside Your Computer" on
book.book Page 57 Thursday, April 5, 2012 5:38 PM