Dell PowerVault NX3600 - Manual (Page 166)

Arguments
Argument Description Format
<VolumeName> NAS volume name Existing NAS volume name
<Name> Snapshot name Maximum length of 230
characters, and may contain
letters, numbers, spaces, and
underscores. Control characters,
commas, and so on are not
allowed.
Example
Add a snapshot named snap1 for a NAS volume named vol1:
CLI> NAS-volumes snapshots add vol1 snap1
NAS-volumes replication view
Description
Display the status of replication.
Format
NAS-volumes replication view <VolumeName> <RemoteClusterName>
<RemoteVolumeName>
Arguments
Argument Description Format
<VolumeName> Source NAS volume name Existing NAS volume name
<RemoteClusterName> Destination FluidFS cluster name Existing FluidFS cluster name
<RemoteVolumeName> Destination NAS volume name Existing NAS volume name
Example
Display the current replication status where the source NAS volume is named volsource, the destination
FluidFS cluster name is idffs2, and the destination NAS volume is named voldest:
CLI> NAS-volumes replication view volsource idffs2 voldest
Output
Role = Source
Volume Name = volsource
Remote Cluster Name = idffs2
Remote Volume Name = voldest
Achieved Recovery Point = 13-Aug-13 14:52:06
166