Dell PowerVault NX3600 - Manual (Page 95)

Example
View the current settings of the client network interface:
CLI> networking client-network-interface view
Output
Mode = ALB
MTU = 1500
networking client-network-interface edit
Description
Modify the settings of the client network interface.
Format
networking client-network-interface edit {options}
Options
Option Description Format
-Mode <Mode> Bonding module type of the
client network interface Possible values are ALB, LACP
-MTU <MTU> MTU of the client network
interface Whole positive number (1 to
9000)
Example
Change the mode of the client network interface to LACP:
CLI> networking client-network-interface edit -Mode LACP
networking client-load-balancing view
Description
Display information about a client on the same subnet as the FluidFS cluster (in other words, a client in a
flat network) or a router. Clients that access the FluidFS cluster through a router cannot be viewed. From
the perspective of the FluidFS cluster, it appears that the communication is directly with the router.
Format
networking client-load-balancing view <ClientIP> <AccessIP>
95