Dell Toner Monitoring Services - Manual (Page 20)

Configuration
16
Note: Enable Printer Export is the recommended setting, and it is selected by default.
You can skip this temporarily during account setup by selecting the Skip Printer Export
radio button, and then click OK. The application displays a warning message, reminding you
to enable the printer export after you have completed configuration.
c. Click OK to close the Printer Export tab and return to the Synchronize Settings dialog
box.
Corporation Security Mode Tab: By default, the application contacts XSM daily and allows
administrators to remotely change settings, avoiding the need for on-site visits. If your
corporation requires a higher level of security, you can lock down the communication, so that
there is no communication to XSM except for printer data synchronization. In this mode, any
setting changes require an on-site visit and the application will not report any computer or
printer IP addresses or site settings to XSM. It is not recommended that you change this
setting; however, if someone asks you to change this setting, here are the steps you would
follow.
Note: If your version of XDA does not contain the Corporation Security Mode tab, your
version of XDA will operate in Normal mode.