Dell Toner Monitoring Services - Manual (Page 27)

Configuration
23
 In the "GET" Community name section, click New and enter a new name.
 Click OK to return to the first screen of the Search for Printers section.
 Modify other settings in this dialog box, or click OK to return to the Search Settings window.
"SET" Community Names: "SET" community names are used to configure parameters on
networked printers. To reset the printers, you must configure the correct "SET" names. The
default settings for the SNMP "SET" community name are "internal", "private", and "public".
Go to the "SET" community names section of the Advanced Communication Properties screen.
 In the "SET" Community name section, click New and enter a new name.
 Modify other settings in this dialog box, or click OK to return to the Search Settings
window.
Communication Settings: allows you to set a limit on timeouts and number of retries for printer
searches.
Go to the Communications Settings section of the Advanced Communication Properties screen.
 From the Timeout drop-down list, select a number to identify the number of seconds.
 From the Retries drop-down list, select a number.
 Modify other settings in this dialog box, or click OK to return to the Search Settings
window.