System setup, Entering system setup, F12> menu – Dell Vostro 1320 (Early 2009) User Manual
Page 2
Back to Contents Page
System Setup
Dell™ Vostro™ 1320 Service Manual
Your computer's BIOS, or System Setup program allows you to do the following:
l
Access System Setup by pressing <F2>
l
Bring up a one-time boot menu by pressing <F12>
Entering System Setup
Press <F2> to enter System Setup and make changes to the user-definable settings. If you are having trouble entering Setup using this key, reboot and press
the <F2> key when the keyboard LEDs first flash.
<F12> Menu
Press <F12> when the Dell logo appears to initiate a one-time boot menu with a list of the valid boot devices for the computer. The devices listed on the boot
menu depend on the bootable devices installed in your computer.
l
Internal HDD
l
CD/DVD/CD-RW Drive
l
Onboard NIC
l
BIOS Setup
l
Diagnostics (starts the Pre-boot System Assessment (PSA) diagnostics)
This menu is useful when attempting to boot to a particular device or to bring up the diagnostics for your computer. Using the boot menu does not make any
changes to the boot order stored in the BIOS.