Display assembly, Removing the display assembly – Dell Vostro 1320 (Early 2009) User Manual
Page 28
Advertising
Back to Contents Page
Display Assembly
Dell™ Vostro™ 1320 Service Manual
Removing the Display Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
from the computer.
3.
Remove the
hard drive
from the computer.
4.
Remove the
WLAN card
from the computer.
5.
Remove the
hinge cover
from the computer.
6.
Remove the
keyboard
from the computer.
7.
Disconnect the antenna cables from the WLAN card.
8.
Draw the antenna cables through the system board.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Advertising