Palm rest, Removing the palm rest – Dell Vostro 1320 (Early 2009) User Manual
Page 48
Back to Contents Page
Palm Rest
Dell™ Vostro™ 1320 Service Manual
Removing the Palm Rest
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
from the computer.
3.
Remove the
access panel
from the computer.
4.
Remove the
heat sink
from the computer.
5.
Remove the
hinge cover
from the computer.
6.
Remove the
hard drive
from the computer.
7.
Remove the
optical drive
from the computer.
8.
Remove the
display assembly
from the computer.
9.
Remove the thirteen screws that secure the palm rest to the bottom of the computer.
10.
Turn over the computer and release the fingerprint reader data cable clip.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.