Heat sink and processor, Removing the heat sink and processor – Dell Vostro 1320 (Early 2009) User Manual
Page 54
Advertising
Back to Contents Page
Heat Sink and Processor
Dell™ Vostro™ 1320 Service Manual
Removing the Heat Sink and Processor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
from the computer.
3.
Remove the
access panel
from the computer.
4.
Remove the
fan
from the computer.
5.
Loosen the four captive screws that secure the heat sink to the computer.
6.
Lift the edge of the heat sink that is closest to the center of the computer.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Advertising