Dell DR4000 - Manual (Page 7)

7 Setting Up the Dell™ DR Series System as a CIFS Backup Target on EMC Networker | February 2014
8. Log on to the DR Series system administrator console using the IP address you just provided for
the DR Series system, the username administrator, and the password St0r@ge! (the “0” in the
password is the numeral zero).
9. Join the DR Series system to Active Directory.
Note: If you do not want to add the DR Series system to Active Directory, see the DR Series System
Owner’s Manual for guest login instructions.
a. Select Active Directory from the navigation panel on the left side of the management
interface (also known as the dashboard).