Dell DR4000 - Manual (Page 5)

5 Setting Up the Dell
™
DR Series System on Veeam | May 2014
1 Install and Configure the DR Series Deduplication Appliance
1. Rack and cable the DR Series system and power it on.
2. Initialize the DR Series system. Refer to the Dell DR Series System Administrator Guide under the following
topics: “iDRAC Connection,” “Logging in and Initializing the DR Series System,” and “Accessing
iDRAC6/iDRAC7 Using RACADM”.
3. Log in to iDRAC using the default address 192.168.0.120, or the IP that is assigned to the iDRAC interface.
Use the user name and password of “root/calvin”.
4. Launch the virtual console.