Dell Acceleration Appliances for Databases - Manual (Page 29)

Connecting to ION Accelerator
______________________________________________________________________
If you are setting up a permanent HA cluster, it is recommended to connect to each node. That
way, if failback occurs, first-time setup on the second node won’t be necessary.
You can access and use the ION Accelerator software in two ways: via the command line or via the
GUI (Graphical User Interface).
Logging In via the CLI (Command-line Interface)
1. At the login prompt, type admin as the username and press Enter.
2. At the password prompt, type the password you created in First Boot and press Enter.
3. Once you are logged in to ION Accelerator, proceed to the ION Accelerator CLI Reference for
instructions on how to set up and manage your ioMemory storage.
Logging In via the GUI
1. To log in with your browser, access the URL indicated in the console screen, which is the
management port you configured in First Boot. (The example below uses 10.60.31.43.)
2. At the login prompt, type admin as the username and press Enter.
3. At the password prompt, type the password you created in First Boot and press Enter.
When you access the ION Accelerator URL, the Admin Password login prompt appears:
2.4.1-119
22