Configuring multipathing on windows server 2012 – Dell Acceleration Appliances for Databases User Manual
Page 46
Advertising
Configuring Multipathing on Windows Server 2012
To configure multipathing on Windows Server 2012,
1. Open the MPIO Control Panel and type mpio in the search box.
2. Click MPIO to start the mpio utility.
The Properties dialog appears, with the MPIO Devices tab active. This tab displays the
hardware IDs (such as FUSIONIOION LUN in the example below) of the devices managed by
MPIO whenever they are present.
3. Click Add in the dialog to add a hardware ID.
39
Advertising