Dell Acceleration Appliances for Databases - Manual (Page 33)

3. Change the iSCSI port IP address in the dialog.
4. Select OK and press Enter.
5. For Linux initiators, add the new target session to the initiator by running the following
command:
iscsiadm -m discovery -t st -p <new iSCSI IP address> <new iSCSI IP
address> <iqn:eth#>
6. For Linux initiators, log in to the target (all sessions) from the initiator:
iscsiadm -m node –l
7. Run the CLI command
initiators –dt
to display the new initiator.
8. Add this initiator to an existing group:
initiator:update –a <inigroup name>
<initiator iqn>
26