Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 42)

See the Dell Remote Access Controller Installation and Setup Guide for complete information about installing and configuring
RAC software.
NOTE: The default user name and password for a RAC on the NAS system are administrator and powervault
respectively, which differs from the user name and password in the RAC documentation.
Alert Log Messages From Server Administrator
Server Administrator generates alert messages that appear in the SNMP event log file. Alert log messages contain information,
status, warning, and failure messages for drive, temperature, fan, and power conditions.
To see the trap logs, perform the following steps:
1. Log into the NAS Manager.
2. Click Maintenance.
3. Click Remote Desktop, and then log in to the NAS system as an administrator.
NOTE: The default administrative user name is administrator and the default password is powervault.
4. Double-click NAS Utilities on the NAS system desktop.
5. In the NAS Utilities window, double-click System Tools, and then double-click Event Viewer.
6. Double-click the type of log you want to view.
Configuring SNMP Properties
Configuring SNMP Community Properties
1. Log into the NAS Manager.
2. Click Maintenance.
3. Click Remote Desktop, and then log in to the NAS system as an administrator.
NOTE: The default administrative user name is administrator and the default password is powervault.
4. Right-click My Appliance, and click Manage.
5. In the Computer Management window, double-click Services and Applications, and then double-click Services.
6. In the right pane, double-click SNMP Service to display the SNMP Service Properties window.
7. Click the Security tab, and then click Send authentication trap.
Select this option if you want a trap message sent when authentication fails.
8. Select Accepted community names, and then click Add.