Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 6)

Back to Contents Page
NAS Manager
Dell™ PowerVault™ 77xN NAS Systems Administrator's Guide
Logging Into the NAS Manager Disk Quotas
Basic Navigation Using Logs
Changing the NAS Manager Language Shutting Down the NAS System
How to Find Online Help Managing Disks
Configuring Network Properties Managing Volumes
Creating Users Using the NAS Utilities
Using Shares
The Dell™ PowerVault™ NAS Manager is a Web-based user interface that is the primary tool for configuring NAS systems.
This section provides basic information on using the NAS Manager, including how to log on and navigate the interface,
configuring network properties and IP addresses, creating users, using shares and disk quotas, and managing disks and
volumes.
Logging Into the NAS Manager
To use the NAS Manager, you must be logged in as an administrator. You can log in only if the NAS system is on the network
or if you are connected directly to the NAS system with a keyboard, monitor, and mouse.
Logging Into the NAS Manager on the Network
1. Open a Web browser from a client system.
The NAS Manager supports client systems running Microsoft® Windows® operating systems and Internet Explorer 6.0
or later.
2. Type in the name of the NAS system in the Web address field, and then press <Enter>.
The default system name is Dellxxxxxxx, where xxxxxxx is the system's service tag number. For example, if your
service tag number is 1234567, enter http://DELL1234567.
You can also access the system directly through secure port 1279 by connecting to https://DELLxxxxxxx:1279 where
xxxxxxx is the system's service tag number.
3. When the Enter Network Password window displays, type a user name and password and then click OK to log in as
the administrator.
NOTE: The NAS Manager default administrator user name is administrator and the default password is
powervault.
4. When the Enter Network Password window appears again, enter the same user name and password that you
entered in step 3, and then click OK.