Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 66)

Using Remote Desktop to Delete FTP Shares
To delete FTP shares using MMC, perform the following steps:
1. Log in to the NAS Manager.
2. From the NAS Manager, click Maintenance.
3. Click Remote Desktop.
4. Log on as an administrator.
NOTE: The default administrator user name is administrator and the default password is powervault.
5. Double-click the NAS Utilities icon on the desktop of the NAS system.
6. Click Administrative Tools.
7. Click Internet Information Services (IIS) Manager.
8. Click Local Computer.
9. Click FTP Sites.
10. Double-click Default FTP Site to expand its list.
11. Right-click on the share you want to delete and click Delete.
Server for Network File System (NFS)
Server for NFS can be used to provide disk resources from systems running Windows NT, Windows 2000, and Windows Server
2003 to any system on your network that supports NFS. To administer Server for NFS, perform the following steps:
1. Log into the NAS Manager.
2. Click Maintenance, and then click Services.
3. Click Server for NFS, and then click Startup.
4. In the Set Service Properties window, select whether you want Server for NFS to start automatically, manually, or
whether you want to disable it.
5. Click OK.
NFS Write Cache
NFS write cache is enabled on Windows Storage Server 2003 Standard Edition. It is not enabled on Windows Storage Server
2003 Enterprise Edition because cached data will not fail over in a cluster configuration.
User Name Mapping
User Name Mapping provides mapping of names between the UNIX® and Windows environments. You can configure User Name