Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 47)

VERITAS software, and select Autoplay from the menu.
3. Follow the instructions in the documentation that came with your backup software to complete the installation.
Using VERITAS Backup Exec Remote Administrator
1. On the remote system, click the Start button, and then point to Programs → VERITAS Backup Exec.
The Connect to Server window displays.
2. Type the name of the NAS system in the Server field.
3. Type login information in the Login Information field, and then click OK.
The Backup Exec Assistant window, which displays in front of the Backup Exec window, provides wizards for many
common backup tasks. You can also use the Tools menu on the Backup Exec window to display the Backup Exec
Assistant.
Use Remote Administrator to manage all backup operations just as you would from the local application. See the
VERITAS Backup Exec documentation for more information about how to use the software.
Yosemite TapeWare
NOTE: Before installing the backup software, check the Dell Support website at support.dell.com for the latest driver
and software updates. You might need to install the updates after completing the procedures that follow.
Installing TapeWare on the NAS System
1. Insert the TapeWare installation CD in the NAS system's CD drive.
2. Log in to the NAS Manager.
3. Click Maintenance.
4. Click Remote Desktop.
5. Log in to the NAS system.
6. Follow the instructions in the documentation that came with your backup software to complete the installation.
NOTE: If the installation CD does not autorun, from the Windows Control Panel click the Start button and select Run.
Browse to the executable file on the CD drive. Click Open and then click OK.
Installing Tape Device Drivers for Windows Backup and
Recovery Tools
If you are using the Windows backup and restore tools, you might need to install drivers for both tape drives and tape media
changers.
1. Connect the PowerVault tape drive, and then restart the system.
2. Log in to the NAS Manager.