Dell Inpsiron 560s (Late 2009) - Manual (Page 14)

5. Release the computer cover by pulling it away from the front of the computer and lifting it up.
6. Set the cover aside in a secure location.
Replacing the Computer Cover
1. Follow the procedures in Before You Begin .
2. Ensure that all cables are connected, and fold cables out of the way.
3. Ensure that no tools or extra parts are left inside the computer.
4. Align the tabs at the bottom of the computer cover with the slots located along the edge of the computer.
5. Press the computer cover down and slide it towards the front of the computer until you feel a click or feel the computer cover securely installed.
6. Ensure that the cover is seated correctly.
7. Replace the two screws that secure the computer cover, using a screwdriver.
8. Open the chassis feet.
9. Place the computer in an upright position.
Back to Contents Page
1 screws (2) 2 computer cover
3 slot 4 front of the computer
CAUTION: Ensure that none of the system air-vents are blocked. Blocking them would cause serious thermal problems.