Dell Inpsiron 560s (Late 2009) User Manual
Page 27
1.
Follow the procedures in
Before You Begin
.
2.
Route and connect the cables that you disconnected from the system board connectors.
3.
Align and slide the front I/O panel into the front I/O panel clamp slot.
4.
Replace the screw that secures the front I/O panel to the chassis.
5.
Replace the hard drive (see
Replacing the Hard Drive
).
6.
Replace the support bracket (see
Replacing the Support Bracket
).
7.
Replace the front bezel (see
Replacing the Front Bezel
).
8.
Replace the computer cover (see
Replacing the Computer Cover
).
9.
Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION:
Take care not to damage the cable connectors and the cable routing clips when sliding the front I/O panel into the front I/O panel
clamp slot.