Dell Inpsiron 560s (Late 2009) - Manual (Page 20)

Replacing the Media Card Reader
1. Follow the procedures in Before You Begin .
2. If this is a new Media Card Reader installation, remove the break-away metal plate. Align the tip of a Phillips screwdriver with the slot on the break-
away metal plate and rotate the screwdriver outwards to break and remove the metal plate.
3. If not present, attach the two shoulder screws to the Media Card Reader.
1 FlexBay USB cable 2 securing tab
3 shoulder screws (2) 4 Media Card Reader (not present on all computers)
NOTE: If you are replacing an existing drive, remove the shoulder screws from the existing drive and attach them to the replacement drive.