Dell Inpsiron 560s (Late 2009) - Manual (Page 25)

Replacing the Chassis Fan
1. Follow the procedures in Before You Begin .
2. Align the chassis-fan top and bottom tabs with the projections in the chassis, and slide the chassis fan towards the back of the computer.
3. Replace the screw that secures the chassis fan to the chassis.
4. Connect the chassis fan cable to the system board connector (see System Board Components ).
5. Replace the computer cover (see Replacing the Computer Cover ).
6. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
1 Chassis-fan bottom tab 2 Chassis-fan top tabs (2) 3 screw