Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 41)

NOTE: To restore your system-state data, you must have previously backed up your system using the System-
State Backup tool on the Advanced Administration Menu or from Windows 2000 backup and recovery tools.
1. Click Maintenance.
2. Click Backup.
3. Log on to the NAS appliance as administrator.
4. Click Restore Wizard.
The Restore Wizard window displays.
5. Click Next.
6. Click Import File.
The Backup File Name window displays.
You must import the file because your system is not aware of previous
backups after you complete a reinstallation.
7. Click Browse.
The Select file to catalog window displays.
8. Browse for your file.
9. After locating your file, click OK.
10. When the Backup File Name window displays, click OK.
The What to Restore window displays.
11. Click the + symbol next to File.
12. Click the + symbol next to Media Created on.
13. Click the + symbol next to System State.
You are prompted for your backup file location.
14. If the location is correct, click OK; otherwise, browse to the correct backup file location.
15. Click the checkbox next to System State.
16. Click Next.
17. Click Advanced.
The Where to Restore window displays.
18. On the Restore files to drop-down menu, select Original Location to restore the files to the same location they
occupied when they were backed up.
19. Click Next.
The How to Restore window displays.
20. Click Always replace the file on disk.
21. Click Next.
The Advanced Restore Options window displays.
22. Leave all checkboxes unchecked.
23. Click Next.