Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 46)

6. Click Computer Management in the left pane.
7. Click System Tools in the left pane.
8. Click Device Manager in the left pane.
9. Click Unknown Devices in the right pane.
10. Double-click Unknown Tape Device.
11. Click Driver in the pop-up window.
12. Click Update Driver.
The Upgrade Device Driver Wizard displays.
13. Click Next.
14. Click the radio button next to Search for a suitable driver for my device (recommended), and then click
Next.
15. In Optional search locations, click the checkbox for Specify a location.
Deselect the other checkboxes.
16. Click Next.
The Properties dialog box displays.
17. Specify the folder name that contains the device drivers in the path for Copy manufacturer's files from.
18. Click OK, and then click Next.
The Upgrade Device Driver Wizard searches the specified folder for the driver files.
19. Make sure the wizard has selected the appropriate PowerVault tape device, and then click Next.
20. Click Finish.
21. Click Close to exit the driver properties dialog box.
Installing Drivers for PowerVault Tape Drive Media Changers
To install drivers for tape media changers when using Windows 2000 backup and recovery tools, perform the following
steps:
1. Connect the PowerVault tape device, and then restart the machine.
2. Connect to the PowerVault NAS Manager.
3. Click Maintenance, and then click Terminal Services.
4. Log on to a Terminal Services Client session.
5. In the Advanced Administration Menu, click Computer Management under System Management.
6. Click Computer Management in the left pane, and then click System Tools.
7. Click Device Manager in the left pane.
8. Click Medium Changers in the right pane.
9. Double-click Unknown Medium Changer.
10. Click Driver in the Properties window.
11. Click Update Driver.