Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 8)

3. Click a NAS appliance in the Discovered Dell Systems List, and then click Apply.
If the configuration was successful, the status of the NAS appliance in the Remote Kick-Start window changes to a
check mark icon.
NOTE: If more than one Remote Kick-Start utility runs on your network, you can reserve the right to
configure a system by locking it first. To do this, select the system in the Discovered List, and then click
Lock.
Disabling the Kick-Start Utility
If you do not use the Kick-start utility to configure your system, you must disable it immediately. If the Kick-Start utility
is enabled, the system logs in automatically as administrator, which creates a security risk. The Kick-Start utility also
takes up system resources by constantly checking for configuration information.
To disable the Kick-Start utility, perform the following steps:
1. From the NAS Manager primary menu, click Maintenance.
2. Click Terminal Services.
3. Log on to the system as an administrator.
4. Click the X on the top, right-hand corner of the Kick-Start window.
A Warning window displays that asks whether you want the Dell OpenManage Kick-Start configuration tool to run
automatically each time the system starts.
5. Click No. If you click Yes, the Kick-Start utility closes; however, it runs again the next time the system reboots.
Warranty and Return Policy Information
Dell Computer Corporation ("Dell") manufactures its hardware products from parts and components that are new or
equivalent to new in accordance with industry-standard practices. For information about the Dell warranty for your
system, see your System Information document.
Other Documents You Might Need
In addition to this System Administrator's Guide, the following documentation is included with your system:
The NAS appliance User's Guide, which describes system features, technical specifications, and device drivers.
The NAS appliance Installation and Troubleshooting Guide, which provides instructions for installing system
hardware and includes troubleshooting and diagnostic procedures for testing your system.
Supporting system documentation on the NAS appliance Resource CD, which includes information about all the
option cards and software installed.
Your System Information document, which provides basic information about your system, including safety,
regulatory, and warranty information.
You might also have one or more of the following documents:
Documentation that is included with options you purchase separately from the system. This documentation includes
information that you need to configure and install these options in your system.
Technical information files—sometimes called "readme" or "release notes" files—that might be installed on the CDs
that came with your system to provide last-minute updates about technical changes to the system or advanced
technical reference material intended for experienced users or technicians.
Information updates that are sometimes included with the system to describe changes to the system or software
documentation. Always read the updates before consulting any other documentation. The updates often contain
information that supersedes the information in the other documents.