Installation and configuration, Unpacking the system, Installing the rails and enclosure – Dell POWEREDGE M620 User Manual
Page 3: Installing a sleeve in the enclosure
Installation And Configuration
WARNING: Before performing the following procedure, review the safety instructions that came with the blade
server or enclosure.
Unpacking The System
Unpack your blade server or enclosure and identify each item.
Installing The Rails And Enclosure
Figure 1. Installing the Enclosure in the Rack
Assemble the rails and install the enclosure in the rack, following the safety instructions and the rack installation
instructions provided with the enclosure.
Installing A Sleeve In The Enclosure
NOTE: This procedure applies only to PowerEdge M420.
A sleeve includes up to four quarter-height blades to function as a system. Depending on your order, the sleeve may
ship with the blades preinstalled.
CAUTION: Exercise utmost care when installing or removing the sleeve to prevent damage to the internal
components. To ensure protection for the electronic components inside, follow the Electrostatic Discharge (ESD)
guidelines.
3