Dell PowerVault 57F - Manual (Page 24)

2-14 Dell PowerVault Switch Manager User’s Guide
  %  *
The Switch Management Application is a representation of the front panel of the
switch and is displayed when you click a switch icon from the Fabric View. The infor-
mation displayed is as close as possible to a real time view of switch status.
Figure 2-7 shows the Switch Management Application. Table 2-7 provides a
description for each component in this window.
Configuration
Members field Displays a list of members for the selected zone config-
uration; only one configuration can be enabled at a time;
if no configurations are enabled, the zone configurations
are not active in the fabric
Enable Config
checkbox Check to enable the currently selected configuration;
uncheck to disable; the enabled configuration does not
actually take effect until you click Apply
Enabled Config field Displays the enabled configuration or the configuration
that will be enabled when you change configurations
and click Apply; the enabled configuration does not
actually take effect until you click Apply
Apply button Click to apply all changes made to the switch during this
session
NOTE: If you have made changes to a function, click
Apply before switching to another function; otherwise,
you may lose the changes.
Cancel button Click to cancel all changes and exit Zone Administra-
tion; changes cannot be canceled after they have been
applied
Done button Click to apply all changes made to the switch during this
session and close the dialog box

' $ (