Dell PowerVault 57F - Manual (Page 31)

support.dell.com Using the Dell PowerVault Switch Manager 2-21
+
% 
The Performance window displays throughput for each port and for the entire switch.
Throughput is shown in megabytes per second (MB/sec). The switch throughput is
the sum of throughput for all ports. Port throughput represents the number of bytes
received plus the number of bytes transmitted.
In the Performance window, the horizontal axis represents elapsed time and the ver-
tical axis represents throughput. Each port graph contains up to 60 seconds of
performance data; the switch graph at the bottom contains up to 4 minutes of data.
To access this window, click perform. in the Switch Management Application.
Figure 2-9 shows the Performance window.
 - +(  
*% 
The administration window consists of the following functions.
NOTE: You must have admin privilege to access these functions.


Switch administration


User administration


Firmware upgrade
Loss of Sync field Number of times loss of sync occurred
Loss of Signal
field Number of times loss of signal occurred

* +
,(