Dell PowerVault 57F - Manual (Page 29)

support.dell.com Using the Dell PowerVault Switch Manager 2-19
Port Status field


No_Module — No GBIC module in this port


No_Light — The module is not receiving light


No_Sync — The module is receiving light but is out
of sync


In_Sync — The module is receiving light and is in
sync


Laser_Flt — The module is signaling a laser fault
(defective GBIC)


Port_Flt — The port is marked faulty (defective
GBIC, cable, or device)


Diag_Flt — The port failed diagnostics


Online — The port is up and running


Lock_Ref — The port is locking to the reference
signal
Port Type field


E-Port — Switch link port


G-Port — Generic port


U-Port — Universal port


F-Port — Fabric port


FL-Port — Fabric loop port


L-Port — Loop port
PortStats tab
4-Byte Word
Transmitted field Number of four-byte words transmitted
4-Byte Word
Received field Number of four-byte words received
Frames Transmit-
ted field Number of frames transmitted
Frames Received
field Number of frames received
C2 Frames
Received field Number of class 2 frames received
C3 Frames
Received field Number of class 3 frames received

* +
,(