Dell PowerVault DP500 - Manual (Page 18)

18
Configuring Your System for the First Time
3 In the Computer field, type the computer name of the storage server and
then click Options.
The default system name is Dellxxxxxxx, where xxxxxxx is the system's
service tag number. For example, if your service tag number is 1234567,
type DELL1234567.
NOTE:
If you cannot connect to the system through a remote desktop
connection, you must use a keyboard, monitor, and mouse to configure the
IP address, gateway subnet mask, and DNS server. See "Configuring the
Network Connection" on page 11.
4 In the Remote Desktop Connection window in the Connection settings
box, click Save As.
5 In the Save As window in the File name field, type a name for the connection
and include the default .rdp extension.
6 In the Save in drop-down menu, select Desktop and then click Save.
Your connection is saved to your desktop.
7 Initiate the remote desktop connection. When prompted, enter the
default administrative user name and password for your system, and then
click OK.
NOTE:
The default administrative user name is administrator and the
default password is storageserver .
8 Use the MMC to begin setting up shares and volumes on the storage server.
See "Accessing the Microsoft Management Console" on page 16.
For more information about configuring your remote desktop connection,
click Help in the Remote Desktop Connection window.
Installing Dell OpenManage Server Administrator
For information on installing Dell OpenManage™ Server Administrator, see
the Microsoft Windows Storage Server 2003 R2 x64 Edition with SP2 Getting
Started Guide on the Dell Support website at support.dell.com.