Dell M209X Projector - Manual (Page 14)

14 Using Your Projector
4 Disconnect the power cord from the electrical outlet and the projector.
NOTE: If you press the Power button while the projector is running, the
" Press Power Button To Turn Off Projector" message appears on the screen. To
clear the message, press a button on the control panel. The message disappears after
5 seconds.
Adjusting the Projected Image
Raising the Projector Height
1 Press the elevator button.
2 Raise the projector to the desired display angle, and then release the button to
lock the elevator foot into position.
3 Use the tilt adjustment wheel to fine-tune the display angle.
Lowering the Projector Height
1 Press the elevator button.
2 Lower the projector, and then release the button to lock the elevator foot into
position.
1 Elevator button
2 Elevator foot
1
2
3 3