Dell M209X Projector - Manual (Page 28)

28 Using Your Projector
Select On to enable password protection. A Please Key In the Password screen
appears requesting you to enter a password when the projector is powered on the
next time. Select Off to disable password protection.
NOTE: Password protection is disabled by default.
If you enable this feature, you will be asked to enter the projector's password
after you turn on the projector:
1 1st time password input request:
a Go to Others menu, press Enter and then select Password to Enable the
password setting
.
b Enable the Password function will pop-up a character screen, key in a 4-
digit number from the screen and press the Enter button.
c To confirm, enter the password again.
d If the password verification is successful, you may resume with accessing
the projector's functions and its utilities.
2 If you have entered incorrect password, you will be given another 2 chances.
After the three invalid attempts, the projector will automatically turn off.
NOTE: If you forget your password, contact Dell.