Dell M209X Projector - Manual (Page 27)

Using Your Projector 27
OTHERS
V
OLUME
—Press to
decrease the volume and
to increase the
volume.
M
UTE
—Allows you to
mute the sound.
A
UDIO
S
OURCE
—Select
either HDMI or
Analog (Audio In) as
the audio source for use.
C
USTOMIZED
S
CREEN
—Press
Enter. The "Customized
Screen" menu appears.
Select "YES" to capture
the screen image as a "My
Customized logo". This
screen replaces all the
original screens with the
Dell logo. You can recover
the default screen by selecting "Dell Logo" on the pop-up screen.
NOTE: To capture a full image, ensure the input signal that is connected to
projector is 1024x768 resolution.
M
ENU
L
OCK
—Select On to enable Menu Lock and hide the OSD menu. Select Off
to disable the Menu Lock. If you want to disable the Menu Lock function and
have the OSD disappear, press the Menu button on the control panel or remote
control for 15 seconds, then disable the function.
M
ENU
T
IMEOUT
—Allows you to adjust the time delay of the OSD Timeout. The
default setting is 30 seconds.
M
ENU
P
OSITION
—Allows you to select the location of the OSD on the screen.
M
ENU
T
RANSPARENCY
—Allows you to select the transparency level of the OSD
background.
P
ASSWORD
—Allows you to password protect the projector. This security utility
enables you to impose a variety of access restrictions to protect your privacy and
stop others from tampering with your projector. This means that the projector
cannot be used if it is taken without authorization, and thus serves as a theft-
prevention feature.