Dell Latitude X1 - Manual (Page 14)

Display Panel
1. Follow the instructions in " Preparing to Work Inside the Computer ."
2. Remove the keyboard .
3. Remove the hinge covers .
4. Remove the display assembly .
5. Remove the display bezel .
6. Remove the two M2 x 3-mm screws from the top of the display panel.
7. Remove the M2 x 4-mm captive display-cable ground screw located at the bottom of the display panel.
8. Remove the two M2 x 4-mm screws that secure the inverter board.
9. Remove the four M2 x 4-mm screws that secure the hinges and display panel to the top cover.
10. Lift the display panel straight out of the top cover.
1 display bumpers (4)
2 M2 x 4-mm screws(4)
3 display bezel
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.