Dell Latitude X1 - Manual (Page 20)

Back to Contents Page
Hinge Covers
Dell™ Latitude™ X1 Service Manual
1. Follow the instructions in " Preparing to Work Inside the Computer ."
2. Remove the keyboard .
3. Remove the hinge covers:
a. Open the display all the way (180 degrees) so that it lies flat against your work surface.
b. Use a plastic scribe or flat-blade screw driver to pry up one of the hinge covers.
c. Lift the hinge cover away from the computer, and lay it aside.
d. Repeat steps a through c to remove the other hinge cover.
Back to Contents Page
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 hinge covers (2)