Dell Latitude X1 - Manual (Page 28)

Back to Contents Page
Power Button
Dell™ Latitude™ X1 Service Manual
1. Follow the instructions in " Preparing to Work Inside the Computer ."
2. Turn the computer over and remove the six M2.5 x 5-mm screws that are not labeled.
3. Remove the keyboard .
4. Remove the display assembly .
5. Remove the memory shield .
6. Remove the hard drive .
7. Remove the thermal-cooling assembly .
8. Remove the palm rest .
9. Disconnect the power button cable from the system board.
10. Remove the M2 x 3-mm screw securing the power button to the system board.
11. Lift the power button straight out of the base.
Back to Contents Page
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 M2 x 3-mm screw
2 power button