Dell Precision M4600 (Early 2011) - Manual (Page 114)

Installing The RGB Low-Voltage Differential Signaling (LVDS) Cable
1. Place the low-voltage differential signaling (LVDS) cable on the display
cover.
2. Replace the adhesives to secure the LVDS cable in place.
3. Install the
display hinge, hinge cap, hinge tower
4. Install the RGB display panel .
5. Install the touch screen display bezel .
6. Install the display assembly .
7. Install the palm rest .
8. Install the hard drive .
9. Install the optical drive .
10. Install the keyboard .
11. Install the keyboard trim .
12. Install the base cover .
13. Install the battery .
14. Follow the procedures in After Working Inside Your Computer .
Removing The RGB Camera Cable
1. Follow the procedures in Before Working On Your Computer .
2. Remove the battery .
3. Remove the base cover .
4. Remove the keyboard trim .
5. Remove the keyboard .
6. Remove the optical drive .
7. Remove the hard drive .
8. Remove the palm rest .
9. Remove the display assembly .
10. Remove the touch screen display bezel .
11. Remove the RGB display panel .
12. Remove the display hinge, hinge cap, hinge tower .
13. Remove the RGB LVDS cable
14. Disconnect the camera cable from the camera and microphone module.
114