Dell Precision M4600 (Early 2011) - Manual (Page 56)

Installing The Palm Rest
1. Align the two metal anchors at the bottom edge of the palm rest to the
anchor hooks on the system.
2. Starting from the right edge of the palm rest, press downwards on the
system to engage the tabs.
3. Work your way around the edges and ensure the tabs are fully engaged.
4. Connect all cables to the palm rest.
5. Press down on the memory module until the securing clips secure the
memory module in place.
6. Tighten the captive screws securing the palm rest in place.
7. Tighten the screws securing the palm rest in place.
8. Tighten the screws on the bottom of the system securing the palm rest in
place.
9. Install the hard drive .
10. Install the optical drive .
11. Install the keyboard .
12. Install the keyboard trim .
13. Install the base cover .
14. Install the battery .
15. Follow the procedures in After Working Inside Your Computer .
56