Installing the display assembly – Dell Precision M4600 (Early 2011) User Manual
Page 79
Installing The Display Assembly
1. Attach the display assembly to the base of the computer.
2. Tighten the screws on the display assembly securing it in place.
3. Tighten the screws on the rear of the system securing the display assembly
in place.
4. Tighten the screws on the bottom of the system securing the display
assembly in place.
5. Connect the camera cable to the system board.
6. Connect the LVDS cable to the system board and tighten the two captive
screws securing the LVDS cable in place.
7. Push the antennas through the opening to the bottom of the computer.
8. Secure the antennas to the routing channels.
9. Connect antennas to installed wireless solutions.
10. Install the
.
11. Install the
12. Install the
optical drive
.
13. Install the
.
14. Install the
15. Install the
16. Install the
.
After Working Inside Your Computer
79