Installing the graphics card heatsink – Dell Precision M4600 (Early 2011) User Manual
Page 63
Installing The Graphics Card Heatsink
1. Locate the heatsink compartment on the computer.
2. Tighten the captive screws (1 > 2 > 3). Ensure the heatsink is properly
aligned and seated over the graphics processor.
3. Tighten the screw securing the graphics card heatsink in place.
4. Connect the graphics card fan cable.
5. Push the antennas through the opening to the bottom of the computer.
6. Secure the antennas to the routing channels.
7. Connect the antennas to the installed wireless slots.
8. Install the
CPU heatsink
.
9. Install the
palm rest
.
10. Install the
CPU fan
.
11. Install the
secondary hard drive
.
12. Install the
primary hard drive
.
13. Install the
.
14. Install the
keyboard
.
15. Install the
keyboard trim
.
16. Install the
base cover
.
17. Install the
battery
.
After Working Inside Your Computer
63