Installing the input/output board – Dell Precision M4600 (Early 2011) User Manual
Page 70
Advertising
11. Lift the right edge of the I/O board upwards to disengage the connector and
remove from the system.
Installing The Input/Output Board
1. Place the Input/Output (I/O) board on the system and ensure the connector
is properly engaged to the matching connector on the system board.
2. Tighten the single screw securing the I/O board in place.
3. Connect the ExpressCard cable.
4. Install the
.
5. Install the
6. Install the
optical drive
.
7. Install the
.
8. Install the
9. Install the
10. Install the
.
After Working Inside Your Computer
70
Advertising