Display bezel, Replacing the display assembly, Removing the display bezel – Dell Inspiron Mini 10v (1011, Mid 2009) User Manual
Page 16
Replacing the Display Assembly
1.
Place the display assembly in position and replace the two screws that secure the display assembly to the computer base.
2.
Route the Mini-Card cables and connect them to the Mini-Cards, if applicable (see
Replacing the Mini-Card
).
3.
Replace the system board (see
Replacing the System Board
).
4.
Replace the AC adapter connector (see
Replacing the AC Adapter Connector
).
5.
Replace the USB and SIM card board (see
Replacing the USB and SIM Card Board
).
6.
Replace the palm rest bracket (see
Replacing the Palm Rest Bracket
).
7.
Replace the hard drive (see
Replacing the Hard Drive
).
8.
Replace the palm rest (see
Replacing the Palm Rest
).
9.
Replace the keyboard (see
Replacing the Keyboard
).
10.
Replace the battery (see
Replacing the Battery
).
Display Bezel
Removing the Display Bezel
1.
Remove the display assembly (see
).
2.
Press and remove the hinge cover caps (one on each side).
3.
Remove the two rubber pads (one on either side) on the display bezel screws.
4.
Remove the two screws on the display bezel.
5.
Using your fingertips, carefully pry up the inside edge of the display bezel.
CAUTION:
The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.
1
hinge cover caps (2)