Securing a device in the module bay, Step 5, If the airbay is locked – Dell OptiPlex SX280 User Manual
Page 59
4.
Pull the device by the latch release to remove the device from the module bay.
5.
Slide the new device into the module bay.
6.
If desired, you may lock the new device in the module bay by moving the module locking switch to the locked position.
7.
If you removed the cover to lock the device in the module bay, replace the cover.
Installing a Device When Your Computer Is Running Microsoft® Windows®
1.
If a device is installed in the module bay, double-click the Safely Remove Hardware icon on the taskbar.
2.
Click the device you want to eject.
3.
When a computer message indicates that you can remove the device, unplug the device from the computer.
4.
Slide the new device into the module bay.
Securing a Device in the Module Bay
1 device latch release
NOTICE:
Do not place any heavy objects on top of the computer. Doing so may cause difficulty in removing a module device.
1 latch release
NOTE:
You cannot remove a device if your computer is turned on and the device is locked in the module bay. You must shut down the computer and
follow the steps in "
Installing a Device When Your Computer Is Turned Off
NOTICE:
Do not place any heavy objects on top of the computer. Doing so may cause difficulty in removing a module device.