Dell Dimension 8300 - Manual (Page 92)

92 A d d i n g Pa r t s
www
.dell.com | support.dell.com
3 Pull the card up and out of the card clip.
Installing an AGP Card
1 To add or replace the card, press the card lever toward the PCI connector and gently
press the card into the AGP connector until it clicks into place.
2 Release the card lever, ensuring that the tab fits into the notch on the front end of
the card.
3 Secure the card by lowering the hinged lever on the back panel.
4 Close the computer cover (see page 100).
tab
card clip
lever
notch
PCI connector
AGP connector back of computer
card clip
lever
AGP card
card clip
slot connector