Removing the front-panel insert – Dell Dimension 8300 User Manual
Page 97
Advertising
A d d i n g Pa r t s
97
Removing the Front-Panel Insert
Remove the front-panel insert before you install the floppy drive:
1
Open the computer cover to a 90-degree angle (see page 78).
2
Locate the insert in front of the floppy-drive bay.
3
From inside the computer, push in the release tab of the insert.
4
From outside the computer, pull the insert away from the computer’s front panel.
floppy-drive bay
insert release tabs (4)
Advertising