10 fan assembly, 1 removing the fan assembly, Fan assembly – Dell Latitude E6400 XFR (Mid 2008) User Manual
Page 31: Emoving the, Ssembly
Dell
™
Latitude™ E6400 XFR Service Manual
Page 31
3. Connect the antenna connections to the RF Passthru board.
J1 Black – WLAN (to WLAN card)
J2 Black/Red Sleeve – GPS (to GPS card)
J3 Black/Grey Sleeve – WWAN (to WWAN card)
J4 Black – WLAN (from LCD panel antenna)
J5 Black/Grey – WWAN (from LCD panel antenna
4. Replace the bottom access panel (see Replacing the Bottom Access Panel).
5. Follow the procedures in After Working on Your Computer.
10 Fan Assembly
10.1 Removing the Fan Assembly
CAUTION:
Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
1. Follow the instructions in Before Working on Your Computer.
2. Remove the bottom access panel (see Removing the Bottom Access Panel).
3. Remove the three M2.5 x 5-mm screws that secure the fan to the base assembly.
1 Fan 2 M2.5 x 5-mm screws (3)
1
2
J5
J4
J3
J2
J1